Weber 32/36 DGV 5A, part number 2268000500S.
It has the throttle linkage synchronised so both primary & secondary butterflies open together.
This makes it suitable for competition purposes (regulations permitting!) where the standard carburettor has to be used & power over mpg is a premium.
The pump jet is changed to inject fuel down both venturis on acceleration.
Settings as follows:
- Chokes 26/27 (fixed),
- main jets 140/135,
- air jets 165/160,
- idle jets 55/50,
- em.tubes f50/f6,
- pump jet 55 (double),
- needle valve 200.
These are Ford 1600 x/flow specification.
The progressive parts including the pump jet will be supplied in case you wish to revert back to standard setup!
The base gasket is available in the shop if required
Weber 32/36 DGV 5A Carburettor Sync Linkage - HOT ROD - RACE-RALLY FORD X/FLOW
- Brand: Weber
- Product Code: 2268000500s
- Availability: 2
-
£288.00
- Ex Tax: £240.00
Related Products
Weber 32/34 DGV 5A Carb Synchro Rally Carburettor
Weber 32/36 DGV 5A, part number 2268000500S. It has the throttle linkage synchronised so b..
£258.00 Ex Tax: £215.00
Weber Air Jet for DGV/DGAS - All Sizes
Weber DGV/DGAS Air Jets from size 100 up to size 210. The increase is increments of 5...
£2.16 Ex Tax: £1.80
Weber 32/36 DGAV/DGV Carb Pump
Pump jet size 50 to fit the Weber 32/36 DGAV & 32/36 DGV range of carburettors...
£14.96 Ex Tax: £12.47
Weber 32/36 DGAV/DGV Base Gasket Block
Weber 32/36 DGAV or DGV to the inlet manifold. The thin gaskets are bonded to the block & s..
£14.81 Ex Tax: £12.34
Weber DGV/DGAV/DGAS/DGMS Carb Air Filter Gasket
Weber air filter to carburettor lid gasket to suit the Weber DGV/DGAV/DGAS/DGMS range.To be fitted d..
£4.78 Ex Tax: £3.98
Weber 32/36 DGV/DGAV & 38 DGAS/DGMS Carb Top Lid Cover Gasket
Weber lid gasket to fit the Weber 32/36 DGV. DGAV. 38 DGAS.DGMS...
£7.66 Ex Tax: £6.38
Weber DGV/DGAV/DCD Carb Base Spacer Block and Gaskets 15mm
15mm spacer block & gaskets suitable for the Weber DGV, DGAV & DCD type carburettors. It is ..
£23.96 Ex Tax: £19.97
Weber 32/36 DGV Carburettor Adaptor Kit 4 Stud - 79mm x 45mm to Jap Manifold
Carburettor adaptor kit as shown in the image, to enable the fitment of a Weber 32/36 DGV or similar..
£44.40 Ex Tax: £37.00
Weber Carb DCD/DGV Adaptor Kit 2 Stud to 4 Stud
Webcon supplied carburettor adaptor kit as shown in the image, to convert a single 2 stud carburetto..
£154.80 Ex Tax: £129.00
Weber 32/36 DGV & DGAV/DGAS Pump Delivery Valve
Weber 'pump delivery valve' part number 64290.024 to fit the 32/36 DGV,32/36 DGAV &am..
£11.64 Ex Tax: £9.70
Weber Carb Shaft Nut & Tab DGAV,DGAS,DGV,DCD,ICH,DMTL
Weber shaft nut 3471501400 & lock tab 5552000200 to fit DGAV, DGV, DGAS, DMTL, ICH, DF..
£3.05 Ex Tax: £2.54
Weber 32/36 DGAV & DGV, DGAS & DGMS Carb Idle Jet Holder
Idle jet holder & O ring to fit the DGAV,DGV,DGAS,DGMS range of carburettors. Some DGAS/DGM..
£6.96 Ex Tax: £5.80
Weber 32/36 DGV Carb Fuel Return To Tank T Piece Restrictor
T piece restrictor with clips to be used when fitting a Weber 32/36 DGV carburettor replacing the or..
£14.40 Ex Tax: £12.00
Weber 32/36 DFEV/DGV/DGAV/DGAS/DGMS Carb Throttle Lever
Throttle lever which is used on the Weber 32/36 DFEV carburettor conversion for the air cooled VW en..
£14.70 Ex Tax: £12.25
Weber DGV/DGAV/DGAS/DGMS Carb Air Filter 68mm - Redline
Weber DGV.DGAV.DGAS.DGMS range of carburettors. It has top & bottom metal plates retained with 4..
£44.27 Ex Tax: £36.89
Weber 32/36 DGV Carb Throttle Linkage Sync Kit
Sync linkage kit for the Weber 32/36 DGV carburettor to convert it from progressive to synchronized ..
£56.66 Ex Tax: £47.22
Redline DGV/DGAV/DGAS Carb Twin Choke Universal Throttle Linkage
Redline universal throttle linkage as shown in the image. It is designed to be used with twin c..
£49.97 Ex Tax: £41.64
Plenum Chamber Cone Filter Induction Kit - Weber 32/36 DGV & 38 DGAS-DGMS-DMTL
Cone filter induction system to fit the Weber DGAV/DGAS/DGMS/DMTL carburettor bolt-on plenum chamber..
£82.80 Ex Tax: £69.00
Weber 32/36 DGV/DGAV Carb Ford OHC 1.6,2.0 Throttle Linkage
Throttle linkage kit for the Ford OHC engines using a Weber 32/36 DGAV or DGV carburettor. The black..
£85.80 Ex Tax: £71.50
Weber 32/36 DGV 5A Carb Fitting Kit Ford X/Flow Engines
Fitting kit for the Weber 32/36 DGV 5A to assemble on the Ford OHC Pinto engine.Chok..
£45.00 Ex Tax: £37.50
Weber Carb 32/36 DGV 5A Ford 1600 X/Flow +Gasket
Weber 32/36 DGV 5A carburettor, part number 22680.005 It is factory supplied & jetted as origina..
£252.00 Ex Tax: £210.00
Weber Carb 32/36 DGV 5A Ford 1300 X/Flow+Gasket
Weber 32/36 DGV 5A carburettor, part number 22680.005 It is factory supplied & jetted to suit Fo..
£252.00 Ex Tax: £210.00
Weber 32/36 DGV 5A Carb Ford 2.0 OHC Pinto+Gasket
Weber 32/36 DGV 5A carburettor, part number 22680.005 It is factory supplied & jetted to suit th..
£252.00 Ex Tax: £210.00
Tags: Weber, Carburettor, Ford xflow