MISCELLANEOUS
2 x Petrol Pipe Hose Clip Stainless Steel
Stainless steel hose clips suitable for OD pipe up to 32mm & tightens down to minimum OD of 14mm.
2 x Petrol Pipe Hose Clips - Stainless Steel - 11mm/25mm OD
Pair of new stainless steel hose clips suitable for OD pipe up to 25mm & tightens down to minimum OD of 11mm.
2 x Throttle Cable Adjusters 52mm
Pair of throttle cable adjusters which can be used in the Weber LP range of throttle linkages & various other applications. The total len..
2 x Weber 48 IDA Carb Mixture Screws - Pair
Pair of new mixture screws, part number 64750.007 to fit the Weber 48 IDA carburettor.
Air Filter Socks Pair DCOE/DHLA Carb Airhorns/Rampipes Alpha
Weber Alpha rampipe (airhorn) filter socks designed to fit standard length or shorter normal radius types. The length is 115mm..
Battery Master Switch with Relay
FIA approved battery master switch with a relay to give alternator protection. It is supplied with a diode, red key, cap, sticker & wirin..
Carburettor Air Mass Synchometer Type BK Weber 48/50 DCO/SP
Carburettor Synchrometer type BK part number SYN002 for accurate balancing of multiple 48 & 50 DCO/SP Weber carburettors. It is made in G..
Carburettor In Line Fuel Filter 6mm & 8mm Fitting
In line petrol filter as used in Weber carburettor kits, part number 9990006200. It will fit 6mm & 8mm fuel pipe & is designed as a disposable..
Carburettor Syncrometer Weber DCOE
Carburettor Synchrometer, part number 98001.000 for accurate balancing of multiple Weber or Dellorto carburettors. Made in Germany and unlike ..
Dellorto Twin DRLA Carburettor Service Kit
Webcon supplied service kit part number 9607252000 for a pair of Dellorto 36 or 40 DRLA down draught carburettors, as fi..
Facet Fuel Pump Rubber Mounting Kit
Rubber mounting kit suitable for the range of Facet fuel pumps. It has 2 rubber mounts & an earth wire with fitting instructions. M..
Facet Fuel Pump Rubber Mounting kit
Rubber mounting kit for your Facet fuel pump. It has 2 rubber mounts & an earth wire with fitting instructions. Mounted correctly thi..
How To Build & Power Tune Weber DCOE/SP & Dellorto DHLA
This is a brand new Weber DCOE & DCO/SP & Dellorto DHLA manual. It is the latest 3rd colour edition. Features: - New! Enlarged, revised ..
OPEL MANTA 1.9S 1970-75 WEBER 32/36 DGV AIR FILTER ADAPTOR - SOLEX DIDTA
OPEL MANTA 1.9S 1970-75 WEBER 32/36 DGV AIR FILTER ADAPTOR /SOLEX DIDTA ALSO SUITABLE FOR THE VAUXHALL CAVALIER 1.9 Air filter adaptor with fit ..
Synchrometer Adaptor DCOE
A synchrometer rubber adaptor part number 98001.006 from Webcon to be used with the flow synchrometer 98001.00..
Synchrometer Adaptor Weber 38 DGAS /DGMS & 32/36 DGAV
Weber 32/36 DGAV adaptor part number 9800100100 for use with the Synchrometer sold in the shop. It is designed to test & adjust the throt..
Sytec Fuel Hose Alloy Plug 8mm
Sytec blue alloy end plug for 8mm ID pipe suitable for carburettor and fuel injection use.
Sytec Fuel Pipe Finishers PR001 Adonised 6mm ID Pipe
Sytec quality anodised fuel pipe finisher to give the ultimate finishing touch when installing a stainless steel hose fuel line. They are ava..
Throttle Linkage Cable Blue 1 Metre
1.3 metre throttle cable with a nipple on one end for use with many single & twin throttle linkage assemblies on the market can al..
Throttle Linkage Cable Blue 3 Metre
Throttle cable 3 metre with a nipple on one end for use with many single & twin throttle linkage assemblies on the market & can be u..
Throttle Pedal Block Sytec Single/Twin Cable
Alloy throttle pedal block as supplied in the full SYTEC linkage kits & designed to be a universal fit to the standard throttle ped..
Weber 32 & 34 ICH Carb IDLE Cut Off Valve
Weber idle cut off valve (solenoid) to fit the 32 or 34 ICH carburettor. It is supplied without the idle jet (74409) which pushes into the end of ..
Weber 32 DFM/DFE/DIR/DARA/40 DFAV Carburettor Brass Float
Weber brass float, part number 41015.004 to fit the 32 DFM.DFE.DIR.DARA.ADF range of carburettors & 40 DFAV. Genuine Weber factory it..
Weber 32/34 DMTL Carb Idle Cut Off Solenoid
Weber idle cut off valve solenoid to fit the 32/34 DMTL range of carburettors. Fitted as standard factory fit to the Land Rover version. &nbs..
Weber 32/34 DMTL Land Rover Carburettor Float Vent Solenoid
Weber float vent valve (solenoid) fitted as standard to the 32/34 DMTL Landrover carburettor range. Part number 4384605800.
Weber 40/45 DCOE Carb Brass Float
Brass float, part number 41030005, to fit all Weber DCOE carburettors excluding type 151, 152 & others with the black spansil type fitt..
Weber Carb 38 DGAS/DGMS & 40 DFAV Base Inlet Manifold Gasket
Carburettor to inlet manifold gasket 0.5mm thick suitable for the 38 DGAS, DGMS & 40 DFAV Weber carburettors. If using with the original W..
Weber Carb DCD/DGV Adaptor Kit 2 Stud to 4 Stud
Weber carburettor adaptor kit as shown in the image, Convert a single 2 stud carburettor to a 4 stud Weber or similar carburettor. The 2 stud base..
Weber Carb Jet Drill Set & Holder - 0.30mm to 2.0mm
Webcon supplied jet drill set with drill holder. Drills are from 0.30mm to 2.0mm. It will be ideal for experimentation with calibration of carb..
Weber Carb Shaft Nut & Tab DGAV,DGAS,DGV,DCD,ICH,DMTL
Weber shaft nut 3471501400 & lock tab 5552000200 to fit DGAV, DGV, DGAS, DMTL, ICH, DFT, DCD, DFM range of carburettors. Not sui..
Weber Carburettor Official Tuning Manual
The Official Weber Carburettor Tuning Manual. 92 pages of technical & tuning advice, specifications, jetting charts & exploded diagrams. ..
WEBER CARBURETTOR OFFICIAL TUNING MANUAL NEW & SPEED-PRO WEBER/DELLORTO BOOK NEW
This is the official Weber carburettor tuning manuals. It is brand new with 92 pages of technical & tuning advice, specifications, jettin..
Weber DCOE Spindle Shaft Nut Locating Tabs
Genuine Weber DCOE shaft nut locating tabs, part number 55520.004.
Weber DCOE/IDF/DCNF Carb Throttle Spindle Shaft Nuts - Set Of 4
Weber DCOE/IDF/DCNF throttle spindle shaft end nuts. Part number 3471000300.
Weber Throttle Linkage Return Springs x2 - Pair
Pair of new throttle return springs to be used with many Weber & Dellorto linkages. They are designed to fit the Sytec range of link..

































