FORD 2.0/2.1 OHC Pinto Weber Twin 45 DCOE Carb kit 26mm RAMPIPES - 64mm FILTERS

Genuine Weber 45 DCOE 152 carburettor kit to fit a Ford 2.0/2.1 OHC Pinto engine in Escort/Capri/Kit Car. Cortina requires a longer inlet manifold. All parts are new, which include the inlet manifold, using Misab plates, twin cable throttle linkage, with pedal block, which is the Weber LP2000 type, T fuel union, 90 degree union & petrol pipes, water union, inlet gasket. Rampipes are 26mm & enclosed with 64mm Redline air filters. The price includes FREE assembly.

The manifold is the 4270 design which is slightly upswept & gives clearance of the chassis rail on kit cars & battery tray in Escorts! Also notice the cables are able to approach from the bulkhead which will give a neater installation! Although this can be reversed if prefered.

Water union & inlet manifold gasket included

The carburettor settings are: Chokes 36mm, Aux.vents 4.5, Mains 145, Airs 155, Em.tubes F16, Idles 55F8, Pumps 45, B/bleed 40, N/valve 200. 

The inlet manifold is drilled & tapped to accept the water & brake servo unions as required.

INLET MANIFOLD & THROTTLE LINKAGE PROUDLY MADE IN UK, GENUINE WEBER CARBURETTORS MADE IN SPAIN

SPECIAL OFFER PRICE!, READY ASSEMBLED AS SHOWN 

Reason to buy assembled

• No missing or incorrect parts
• No inlet manifold stud alignment fault
• On the bench balance setting
• Correct Thackeray washer installation
• Inlet stud threads lock tightened in place

This kit is not assembled ready to go but is done after each sale so that all components are fresh & checked.
This is done at the weekend when time is a little more forgiving. Shipping is then able to proceed on the following Monday