Search
Products meeting the search criteria
2 x Throttle Cable Adjusters 52mm
Pair of throttle cable adjusters which can be used in the Weber LP range of throttle linkages & various other applications. The total len..
Petrol Fuel Filter Sytec Alloy Black Carb & Injection
Sytec in line fuel fiter, now available in black as well as red & blue. The 30 micron element is removable & washable &..
Renault 5 GT Turbo Fuel Pump - OTP017
Sytec out of tank fuel pump part number OTP017 to fit the Renault 5 GT Turbo & replaces the original Bosch part number 0580464070. Input 12mm, ..
Synchrometer Adaptor Weber 38 DGAS /DGMS & 32/36 DGAV
Weber 32/36 DGAV adaptor part number 9800100100 for use with the Synchrometer sold in the shop. It is designed to test & adjust the throt..
Sytec Fuel Hose Alloy Plug 8mm
Sytec blue alloy end plug for 8mm ID pipe suitable for carburettor and fuel injection use.
Sytec Fuel Pipe Finisher 10mm
Anodised fuel pipe finishers to give the ultimate finishing touch when installing a stainless steel hose fuel line. ( also available in the shop!)&nbs..
Sytec Fuel Pipe Finishers PR001 Adonised 6mm ID Pipe
Sytec quality anodised fuel pipe finisher to give the ultimate finishing touch when installing a stainless steel hose fuel line. They are ava..
Sytec Metal Fuel Filter In Line Carburettor & Injection
Sytec in line fuel fiter, available in red or blue body as shown in the photograph. The micron element is removable & washable & will not ..
Sytec Motorsport Regulator Mounting Bracket With Screws Filtering Kit & BV
Sytec alloy mounting bracket to fit the Malpassi range of fuel regulators & filter kings. Also the range of FSE power boost valves..
Sytec One Way Fuel Valve 8mm
Sytec one way valve to be fitted in the fuel line close to the fuel tank to prevent syphoning. Suitable for 8mm inside bore fuel pipe. Suitabl..
Throttle Linkage Rod 5mm & 2 x 8mm Plastic Ball Ends & Lock Nuts
Linkage rod of 2x hard plastic ball ends & a 6 inch length of 5mm threaded rod (right hand thread) with tightening nuts. The 8mm push in ..
Throttle Linkage Rod Metal Ball Ends Pair With Securing Clip & Nut
Pair of metal ball joint ends with securing clip, right hand thread clockwise rotation, designed to be used with 5mm threaded ..
Throttle Pedal Block Sytec Single/Twin Cable
Alloy throttle pedal block as supplied in the full SYTEC linkage kits & designed to be a universal fit to the standard throttle ped..
Weber 40/45 DCOE Gasket Air Filter Backing Plate
1mm thick gasket to fit between an air filter backing plate & the carburettor face of a Weber 40 or 45 DCOE. This wi..
Weber 40/45/48 DCOE Carb Service Kit Needle Valve Sytec
A service kit for the Weber DCOE carburettor. The parts supplied include the important alloy pump jet washers & a cho..














