Weber DCOE Emulsion Tubes - Set of 4
- Brand: Weber
- Product Code: 61450 x 4
- Availability: In Stock
£35.70
- Ex Tax: £29.75
Set of 4 Weber DCOE emulsion tubes types F2, F9, F11, F16
This offer only applies to these 4 types.
F7......... For mixture enrichment at low rpm or during slight accelerations ( no orifices at the top)
F2, F11, F15, F16............ For mixture weakening at low rpm or during slight accelerations (orifices at the top)
F11....... For high rpm mixture richness reduction when air jet is larger than 2.00mm (many orifices)
F2,F3,F4,F7...... For very large main fuel jets or alcohol based fuels
Related Products
Weber Air Jet for DCOE/IDF/IDA - All Sizes
Air correction jets for the DCOE, IDF & IDA range of carburettors. The sizes available are from 100 to 240 with increments of 5. ..
Weber 40 DCOE Choke Tubes
Weber 40 DCOE choke tubes which can be ordered in sizes 28mm, 30mm, 32mm,33mm, 34mm, 36mm. These are brand new top quality latest ..
Weber 40 DCOE Carb Aux Venturis 4.5
Weber 40 DCOE carburettor 4.5 auxiliary venturis, part number 7000345000. They are designed to fit the older versions of this carburettor whi..
Weber 45 DCOE Carb Choke Tubes
Weber 45 DCOE choke tubes which you can order in sizes 30mm, 32mm, 34mm, 35mm,36mm,37mm, 38mm, 40mm. These are brand new top quality late..
Weber 45 DCOE Choke & A.Vent Locating Screws
Weber 45 DCOE choke & aux.vent locating screws, part number 64840.003. They can be wired through the pre drilled holes or the tabs ..
Weber 45 DCOE Alloy 26mm Rampipes/Trumpets x4 OE Spec
Set of 4 ram pipes (air horns) 26mm fitted length to fit a pair of Weber 45 DCOE carburettors. They are top quality made ..
Weber 45 DCOE Alloy 16mm Rampipes/Trumpets x 4 OE Spec
Set of 4 ram pipes (air horns) 16mm fitted length to fit a pair of Weber 45 DCOE carburettors. They are top quality made ..
Weber 45 DCOE Alloy 60mm Rampipes/Trumpets X4 OE Spec
A set of 4 ram pipes (air horns) 60mm fitted length to fit a pair of Weber 45 DCOE carburettors. They are oe top quality&..
Weber 40/45 DCOE 151 & 152 Mixture Screw
Mixture screw part number 64750.003 to fit the Weber 40 DCOE 151 & 45 DCOE 152 carburettor.
Weber DCOE Carb Idle Speed Adjustment Screw & Spring
Throttle stop screw & spring to adjust tick-over speed on the Weber DCOE range of carburettors.
Weber 40-45 DCOE Carb Rampipe/Airhorn Stud Nuts - Set Of 4
Set of 4 new rampipe tab stud nuts to fit the Weber DCOE carburettor. Part number 34705.004. If you require the tabs for 40 or 45 DCOE they a..
Weber 40 DCOE 151 Carb Aux Venturi Locating Screws & Nuts
Weber 40 DCOE aux.venturi locating screws & nuts Part numbers 64830006 & 34710003, to be used on the later 151 type & some o..
Weber 40/45/48 DCOE Carb Idle Jet Holder
Weber factory idle jet holder part number 5258500600 to fit the DCOE range carburettors.
Weber 40/45 DCOE Carb Air By Pass Screws,Nuts & Caps
Pair of idle by pass screws (6475000200) nuts (3470500100) & white caps (1494500300) as fitted to the Weber 40 DCOE 151 & 45 DCOE 152 & ot..
Weber 40 DCOE 16mm Rampipes/Air horns/Trumpets Pair Alloy
Pair of top quality 16mm fitted length alloy rampipes designed to fit the Weber 40 DCOE range of carburettors.
Weber 45 DCOE Rampipe/Airhorn Gauze Covers Pair
Pair of rampipe (air horn) gauze covers to fit the Weber 45 DCOE fitted with the standard 63mm outer lip bellmouth type. The fine black/silv..
Weber 45 DCOE 60mm Rampipes Pair Factory Parts
Weber 45 DCOE 60mm fitted length steel rampipes (airhorns) part number 52840.001. They are the genuine product as fitted to new 45..
Weber 45 DCOE 75mm Alloy Rampipes
Webcon supplied Weber 45 DCOE 75mm fitted length alloy rampipes (airhorns) They are lightweight with a larger 71.5mm rim..
Weber 40 DCOE 39mm Rampipes x 1 Factory Parts
Weber 40 DCOE 39mm fitted length steel rampipes (airhorns) Part number 52840.012. They are the genuine product as fitted to..
Weber 40 DCOE 18K Carburettor
Weber 40 DCOE 18K carburettor part number 19550.122 fitted with balance throttle lever.The rampipes are 39mm fitted length & the settings as follo..