2 x (Pair) Weber 48 DCO 2-SP Carburettors - 1963000700
- Brand: Weber
- Product Code: 1963000700x2
- Availability: In Stock
£1,327.00
- Ex Tax: £1,105.83
Special Offer Price £1327.00
List Price 2026 is £1840.00
Weber 48 DCO 2/SP carburettors, part number 1963000700.
They are offered at this price as boxed from the factory with a male throttle lever.
The balance bar lever can be supplied at extra cost.
Now available a special mounting kit of studs UNC/UNF with small thackeray washers & lock nuts £24.00 for 2 carburettors can be purchased.
Settings as follows:
Chokes 42mm,
A.vents 5.0,
Mains 180,
Airs 160,
Idles 65F8,
Pumps 45,
B/Bleed 100,
Em.tubes F7,
N/Valve 250.
Note: The fuel unions are supplied without tails.
The 90 degree & T unions are available in our shop.
Related Products
ITG Megaflow Air Filter Box DCOE - 101mm
ITG Megaflow Air Filter JC50 & steel fitting plate 2JC50 with 101mm centres suitable for Ford x/flow,Lotus t/c & BDA applications. ..
K&N Air Filter - DCOE Carb Single/Twin 102mm
This is a new genuine K&N filter, part number 56-9107 to fit a Weber DCOE or Dellorto DHLA carburettor. It is supplied boxed, pre-oi..
K&N Air Filter - DCOE Single/Twin Small Oval 63mm
This is a new genuine K&N filter, part number 56-9104 to fit a Weber DCOE or Dellorto DHLA carburettor. The dimensions are 182mm x 12..
Weber 40/ 45/48 DCOE Air Filter Backing Plate Gasket
Gasket fits between air filter backing plate & the carburettor face of a Weber 40/ 45 DCOE It will ensure a good seal..
How To Build & Power Tune Weber DCOE/SP & Dellorto DHLA
This is a brand new Weber DCOE & DCO/SP & Dellorto DHLA manual. It is the latest 3rd colour edition. Features: - New! Enlarged, revised ..
Carburettor Syncrometer Weber DCOE
Carburettor Synchrometer, part number 98001.000 for accurate balancing of multiple Weber or Dellorto carburettors. Made in Germany and unlike ..
Weber 40/45/48DCOE Carb Fuel Union Bolt Factory Fit
Weber DCOE fuel union bolt as supplied & fitted by the factory on new carburettors. The difference to the original is the size of the hex end ..
Metel Y Piece Fuel Union Carburettor
Metal Y piece fuel union 50mm diameter with 6mm ends, suitable for all carburettor installs, especially when fitting your Weber DCOE car..
Metal T Piece Fuel Union Carb 8mm
Metal T piece fuel union 58mm x 50mm with 8mm ends, suitable for all carburettor installs, especially when fitting your Weber DCOE carbs, as an a..
Weber 40/45/48 DCOE Carb Fuel Union T Piece
T piece union, part number 10536034 to fit the Weber DCOE range of carburettors. It can be matched with the 90 degree union to complete. This ..
Weber 40 DCOE Choke Tubes
Weber 40 DCOE choke tubes which can be ordered in sizes 28mm, 30mm, 32mm,33mm, 34mm, 36mm. These are brand new top quality latest ..
Weber 40 DCOE Carb Aux Venturis 4.5
Weber 40 DCOE carburettor 4.5 auxiliary venturis, part number 7000345000. They are designed to fit the older versions of this carburettor whi..
Weber DCOE 40/45/48 Carb Thackeray Washers x4
4 Thackeray double coil washers to mount one DCOE carburettor to the inlet manifold. They can be used in conjunction with the bonded Misab plate o..
Weber DCOE Mounting Thackeray Washers x8
Set of 8 Thackeray double coil washers to mount your carburettors to the inlet manifold correctly. They can be used in conjunction with the b..
Weber 40 DCOE/DHLA Mounting Plates & Rings x2
Set of 4 Nylex plates & 8 O ring seals to fit the Weber 40 DCOE or Dellorto 40 DHLA carburettors, to mount them on a..
Synchrometer Adaptor DCOE
A synchrometer rubber adaptor part number 98001.006 from Webcon to be used with the flow synchrometer 98001.00..
Weber 40 DCOE 151 Carb Service kit 200 N/Valve
bespoke genuine Weber DCOE service kit suitable for the 40 DCOE 151. It includes the correct mixture screws 64750.003, float pin, pump jet w..
Weber 40 DCOE 151 Carb Service kit 150 N/Valve
bespoke genuine Weber DCOE service kit suitable for the 40 DCOE 151. It includes the correct mixture screws 64750.003, float pin, pump jet w..
2 x Weber 40 DCOE- Ford 1600 XFlow Escort, Capri, Kitcars - Carburettor Kit
Twin Weber 40 DCOE 151 carburettor kit to fit a Ford 1600 x/flow engine in standard or mildly tuned form. The inlet manifold is the 4242-40 ..
Weber 40 DCOE Carb Aux Venturi Spring Retaining Clip
Weber aux.venturi spring retaining clip as fitted to earlier models of the DCOE range of carburettors. This clip has always been part of the aux.ve..
Weber 40-45 DCOE Carb Rampipe/Airhorn Stud Nuts - Set Of 4
Set of 4 new rampipe tab stud nuts to fit the Weber DCOE carburettor. Part number 34705.004. If you require the tabs for 40 or 45 DCOE they a..
2 x (Pair) Weber 40 DCOE 18K Carburettors - Lotus Twincam - Original Spec
New low price! Weber 40 DCOE 18K carburettors to fit the Lotus Elan twin cam engine with original specification fuel bolts, unions, factory spansil..
Weber 40 DCOE 151 Carb Aux Venturi Locating Screws & Nuts
Weber 40 DCOE aux.venturi locating screws & nuts Part numbers 64830006 & 34710003, to be used on the later 151 type & some o..
2 x (Pair) Weber 45 DCOE 152G Carburettors - Ford Zetec 2L 16v - 5 Progression Holes - 1790026300
WEBSITE SPECIAL OFFER PRICE! £1057.00 Weber 45 DCOE 152 carburettors with 5 progression holes as a specific fitment for the Ford 16..
2 x (Pair) Weber 45 DCOE 9 Carburettors - Historic Road - Race - Rally -196000180
Website Special Offer Price £997.00 LIST PRICE 2026 £1450.82 Weber 45 DCOE 9 carburettors, genuine supplied from the factory. The fuel uni..
Weber 40 DCOE Carb Rampipe Tab - Set Of 8
Set of 8 new original rampipe (airhorn) locating tabs part number 52150.012 for the Weber 40 DCOE caburettors. Studs, nut..
Weber 40 DCOE 151 Carb Service Kit 175 N/Valve
Weber DCOE service kit suitable for the 40 DCOE 151. It includes the correct mixture screws 64750.003, float pin, pump jet washers,shaft washers,..
Air Filter Socks Pair DCOE/DHLA Carb Airhorns/Rampipes Alpha
Weber Alpha rampipe (airhorn) filter socks designed to fit standard length or shorter normal radius types. The length is 115mm..
Weber 40 DCOE 16mm Rampipes/Air horns/Trumpets Pair Alloy
Pair of top quality 16mm fitted length alloy rampipes designed to fit the Weber 40 DCOE range of carburettors.
ITG Air Filter Inverted Weber DCOE
ITG air filter JC20 & steel fitting plate 43JC20 to fit your Weber DCOE or Dellorto DHLA. The fixing bracket i..
Weber 40 DCOE 39mm Rampipes x 1 Factory Parts
Weber 40 DCOE 39mm fitted length steel rampipes (airhorns) Part number 52840.012. They are the genuine product as fitted to..